Machine tool usage:
♦ Specialized in processing cylindrical deep hole workpieces.
♦ Such as processing various mechanical hydraulic cylinders, cylindrical through holes, blind holes, and stepped holes.
♦ Machine tools can undertake boring and can also perform rolling processing.
♦ The machine tool bed has strong rigidity and good precision retention.
♦ The spindle speed range is wide, and the feed system is driven by an AC servo motor, which can adapt to the needs of various deep hole machining processes.
♦ The oil feeder and workpiece clamping are secured using hydraulic devices with instrument display, ensuring safety and reliability.
♦ This machine tool is a series of products and can also provide various deformation products according to customer needs.
Main technical parameters:
Scope of work TS2225 TS2235
Bore diameter range—————Φ40～Φ250mm————Φ40～Φ350mm
Maximum depth of boring hole——1-16m（one specification per meter）———1-16m（one specification per meter）
Range of nesting diamete———Φ80～Φ150mm———Φ80～Φ180mm
Range of workpiece clamping diameter ————Φ60～Φ300mm———————Φ100～Φ400mm
spindle part
Spindle center height ———————350mm——————450mm
Headboard spindle hole diameter—————Φ75mm————Φ75mm
Front end taper hole of headstock spindle ———Φ85mm 1:20—————————Φ85mm 1:20
Headboard spindle speed range———42～670r/min ；12级—————42～670r/min ；12级
Feed section
Feed speed range ———5-500mm/min;无级———5-500mm/min;无级
Rapid moving speed of the trailer————2m/min—————2m/min
Motor part
Main motor power———————30kW—————————30kW
Hydraulic pump motor power—————1.5kW—————————1.5kW
Fast moving motor power————3 kW—————————————3 kW
Feed motor power——————4.7kW（servo motor）——————4.7kW（servo motor）
Cooling pump motor power—————5.5kW——————5.5kW×2
other parts
Guide rail width————————650mm———————650mm
Rated pressure of cooling system————0.35MPa—————0.35MPa
Cooling system flow rate—————300L/min—————300，600L/min
Rated working pressure of hydraulic system——6.3MPa———6.3MPa
The oil feeder can withstand a maximum axial force of ——68kN——————————————68kN
The maximum tightening force of the oil feeder on the workpiece is—20 kN—————————————20 kN
Boring bar box part (optional)
Boring bar box spindle aperture—————Φ75mm—————Φ75mm
Conical hole at the front end of the boring bar box spindle ———Φ85mm 1:20———————————Φ85mm 1:20
Boring bar box spindle speed range———42～670r/min ；12Level———————42～670r/min ；12Level
Boring bar box motor power—————15KW———————15KW
