Machine tool usage:
♦ Specialized in processing cylindrical deep hole workpieces.
♦ Such as spindle holes for machining machine tools, various mechanical hydraulic cylinders, cylindrical through holes, blind holes, and stepped holes.
♦ Machine tools can not only undertake drilling and boring, but also perform rolling processing.
♦ Internal chip removal method is used during drilling.
♦ The machine tool bed has strong rigidity and good precision retention.
♦ The spindle speed range is wide, and the feed system is driven by an AC servo motor, which can adapt to the needs of various deep hole machining processes.
♦ The oil feeder and workpiece clamping are secured using hydraulic devices with instrument display, ensuring safety and reliability.
♦ This machine tool is a series of products and can also provide various deformation products according to customer needs.
Main technical parameters:
Scope of work TS2150 TS2250
Borehole diameter range -------- Φ 40 to Φ 120mm -------- None
Maximum diameter of boring hole - - - - - - - - Φ500mm----Φ500mm
Range of nesting diameter - -------Φ100～Φ300mm-------Φ100～Φ300mm
Maximum depth of boring hole -------------1-------------16m (one specification per meter) ----1----16m (one specification per meter)
The diameter range of workpiece clamping is from------- Φ 110 to Φ 670mm
spindle part
Spindle center height ------------500mm --------------500mm
Headboard spindle hole diameter ------------------------------------ Φ 130mm
Front end taper hole of headstock spindle -------- Φ 140mm 1:20- -------Φ 140mm 1:20
Headboard spindle speed range --------3.15-315r/min; Level 21---------------3.15-315r/min; Level 21
Feed section
Feed speed range ------5------400mm/min; Stepless ------5------400mm/min; stepless
Rapid moving speed of the trailer ----------2m/min ----------2m/min
Motor part
Main motor power ------------------37 kW --------------37 kW
Hydraulic pump motor power ---------1.5 kW ---------1.5 kW
Fast moving motor power ------------4 kW ---------4 kW
Feed motor power -- ---5.5kW (servo motor) -- --5.5kW (servo motor)
Cooling pump motor power - -------11kWx2+7.5kW ----- -5.5kWx2
other parts
Guide rail width ---------800mm ---------800mm
Rated pressure of cooling system -------2.5MPa -------0.35MPa
Cooling system flow rate -----200, 400, 600L/min -----300, 600L/min
Rated working pressure of hydraulic system ------6.3MPa--- -6.3MPa
The oil feeder can withstand a maximum axial force of ---------68kN———68kN
The maximum tightening force of the oil feeder on the workpiece is ------------20 kN———20kN
Drill pipe box part (optional)
Drill pipe box spindle aperture ---------- Φ 100mm --------- None
Conical hole at the front end of the drill pipe box spindle ----------- Φ 120mm 1:20------------ None
Range of spindle speed for drill pipe box --------------82 to 490r/min; Level 6----------------- None
Drill pipe box motor power - -----------------30KW - --------------None
