Machine tool usage:
♦ Specialized in processing cylindrical deep hole workpieces.
♦ Such as spindle holes for machining machine tools, various mechanical hydraulic cylinders, cylindrical through holes, blind holes, and stepped holes.
♦ Machine tools can not only undertake drilling and boring, but also perform rolling processing.
♦ Internal chip removal method is used during drilling.
♦ The machine tool bed has strong rigidity and good precision retention.
♦ The spindle speed range is wide, and the feed system is driven by an AC servo motor, which can adapt to the needs of various deep hole machining processes.
♦ The oil feeder and workpiece clamping are secured using hydraulic devices with instrument display, ensuring safety and reliability.
♦ This machine tool is a series of products and can also provide various deformation products according to customer needs.
Main technical parameters
scope of work TS2120 TS2135
Drilling diameter range———————Φ40～Φ80mm————————Φ40～Φ80mm
Bore diameter range———————Φ40～Φ200mm————————Φ40～Φ350mm
Maximum depth of boring hole———————1-16m（One specification per meter）———1-16m（One specification per meter）
Range of nesting diameter———————Φ80～Φ150mm————————Φ80～Φ180mm
Range of workpiece clamping diameter—————Φ60～Φ300mm————————Φ100～Φ400mm
spindle part
Spindle center height————————350mm———————————450mm
Headboard spindle aperture——————Φ75mm———————————Φ75mm
Front end taper hole of headstock spindle————Φ85 1:20———————————Φ85 1:20
Headboard spindle speed range————60～1000r/min ————————42～670r/min ；12级
Feed section
Range of feed rate———————5-300mm/min————————5-300mm/min
Fast moving speed of pallet—————2m/min———————————2m/min
Motor part
Main motor power————————30kW————————————30kW
Hydraulic pump motor power——————1.5kW————————————1.5kW
Fast moving motor power—————3 kW—————————————3 kW
Feed motor power———————4.7kW（servo motor）———————4.7kW（servo motor）
Cooling pump motor power——————5.5kWX4group—————————5.5kWX4group
other parts
guide rail width—————————650mm————————————650mm
Rated pressure of cooling system—————2.5MPa————————————2.5MPa
Cooling system flow rate———————100、200、300、400L/min———100、200、300、400L/min
Rated working pressure of hydraulic system———6.3MPa————————————6.3MPa
The oil feeder can withstand the maximum axial force———68kN—————————————68kN
The maximum tightening force of the oil feeder on the workpiece—20 kN—————————————20 kN
Drill pipe box part (optional)
Drill pipe box spindle aperture——————Φ75mm————————————Φ75mm
Conical hole at the front end of the drill pipe box spindle————Φ85mm 1:20——————————Φ85mm 1:20
Range of spindle speed for drill pipe box————60～1000r/min ；12level——————42～670r/min ；12level
Drill pipe box motor power——————15KW—————————————15KW
